Basement Waterproofing Before & After Photos

In Providence, RI this wall crack wasn’t leaking, but the owner was not ready to risk it eventually getting to that point and wanted it sealed. Luckily, we have just the trick to fill the crack to prevent any leaking or issues, our FlexiSpan system! With this system, we can fill the crack with a polyurethane sealant that can move with the crack over the seasons and won’t chip away. Then the second layer of drainage is added, if the crack were to ever leak and go through the first layer then the next layer will protect the basement.

A customer in North Providence, RI was experiencing an issue with humidity. This was an on going problem for him throughout the years, and it was getting worse. The basement was showing signs of mold on the wood, which is not the best thing to breathe in! We took initiative and decreased the humidity risk by installing CleanSpace wall vapor barrier to prevent moisture, mold and rot. In addition, we installed our WaterGuard interior drainage system to collect water seepage, which also contributed to the humidity problem. 

A homeowner was looking for a drainage system for his wet basement. He already owned a sump pump, but not all of the water was getting to this sump, so a proper solution, like this WaterGuard interior drainage system we installed, was the best way to collect all of the water seepage. Along with that, our TrenchDrain system was placed to surround this water heater so that surface water doesn't build up around here. By intercepting the water before it reaches the floor, we decreased the chances of mold growth and terrible odors. 

The customer in Providence RI met us at the Rhode Island Home Show and was interested in getting their basement waterproofed. After the house was vacant for years they needed to care for the home and the first step was keeping the basement dry.

In Providence, RI - this partially finished concrete foundation basement was taking on water. The homeowners have a sump pump installed, but it never seemed to run and the liner was always dry - meaning none of the water seeping in through the foundation was even making it to the pump so that it could run. As waterproofing professionals, we see this more often than you may think, where homeowners install a sump pump system to help with the water and maybe it works the first time or first couple times, but when it's not situated in the most effective spot in the basement, it becomes useless in the long run.

When our inspector, Trevor, assessed the basement to determine the source of the issues and how to best approach rectifying them - he was careful to make sure that this solution would hold up over time, should the homeowners decide to refinish the basement again. With our WaterGuard drainage system installed, this would capture the water seeping in from the edges of the foundation; our CleanSpace Wall system would capture any moisture or water seeping through the porous concrete foundation walls and channel them down into the WaterGuard system. Our TripleSafe sump pump system will expel the water from the basement and up away from the foundation, and our SaniDry Sedona will help regulate and maintain relative humidity within the basement - assuring that it never reaches a point where mold or mildew could grow. And, it's set up to self-drain: so there is no worrying about keeping up with emptying out a bucket or drawer on the unit!