Professional Wet Basement & Crawl Space Repair in Framingham, MA

A customer living in Framingham, MA was bothered by the structural integrity of his home. He decided to reach out to to us for a foundation repair solution to take try to diagnose and find a solution. The homeowner was concerned over the fact that the floors seemed uneven in his home, as well as visible foundation cracks. 

Once our inspector was able to take a deep look at the foundation, he proposed to stabilize it using our PushPiers. This steel solution is meant to last long and stabilize foundations, making this the best solution for this homeowner. After an agreement, our production crew arrived to begin the stabilization project. 

The crew excavated soil around the home, attached metal brackets to the bottom of the foundation, drove down the steel piers through those brackets and into the ground until they reached bedrock, then stabilized the whole foundation using hydraulic power. After the foundation was in a more secured state, this homeowner's worries immediately vanished! 

This basement in Framingham, MA would always result in a wet floor due to all the water intrusion through the wall cracks. With no way to get rid of the water, this basement was in atrocious condition. Not until we serviced this basement! Our system design specialist suggested to install CleanSpace wall vapor barrier to prevent any moisture intrusion, a WaterGuard interior drainage system to collect water seepage and a TripleSafe sump pump to discharge it all out! 

The production crew arrived to install the waterproofing system with their tools, and once the system was in place, they made a discharge line that started from our TripleSafe to the outside where the water will disperse. The homeowner felt extremely happy to know that his basement won't get wet all year long! 

When this customer in Framingham, MA called our appointment center, she was telling us how wet her basement was after weeks of rain! After each storm, she said the puddles on the basement floor progressively got bigger. When water builds up like this, it can create a damp, musty cold environment. But not only that, it can lead to a potential flood and structural damages. So let's prevent that! We installed a TripleSafe sump pump to pump the unwanted water out of the basement. This is the best way for this homeowner to keep her basement dry from the outside horrors! 

Heavy rains were affecting this basement in Framingham, MA. The more it rained, the more the basement leaked. It was wet, damp and cold down there because there was no system to get rid of the water! To avoid water damage and future structural issues, we installed a TripleSafe sump pump at the lowest spot in the foundation, and additionally installed a WaterGuard interior drainage system to collect and move the seepage. Both of these systems work closely together to get rid of the annoying rain water that was disturbing this home. 

When this homeowner in Framingham, MA saw a puddle of water sitting in his basement, he became worried that more water would build up as the rainy season approaches, so he reached out to us for help. Our appointment center scheduled a day for the inspector to visit the home to evaluate the problem closely. 

Once the inspector got to the home, he spotted the intrusion point of the basement. There were various cracks in the floor and wall, so he recommended that we installed CleanSpace vapor barrier to keep the moisture out, TripleSafe sump pump to discharge the water, WaterGuard drainage system to collect and channel the seepage and a SaniDry Sedona to get rid of excess moisture in the air. This was the perfect system for the basement as the production team swiftly installed all the components of the plan. Once the system was in place, the basement looked much better! 

A customer in Framingham, MA bought this house back in 2005, as it came with an existing sump pump system in the basement. He told us that the float switch would get stuck and would see couple of inches of water every time it happened. Our inspector went to the basement to examine the problem so a solution could be made. The inspector informed the homeowner that our TripleSafe sump pump could replace his old pumping system, as it will come with two sump pumps to back each other up if one needs more pumping power along with a battery backup pump incase of power outages. 

A homeowner in Framingham, MA needed a new sump for his unfinished basement. The issue was that his current sump at the time wasn't powerful enough to discharge all the water he was getting. So we sent an inspector out to see what solution would be best. To resolve the issue, the inspector had our production crew take out the old sump and install our SuperSump sump pump that can discharge water at a faster rate than his current one. They also built in an electrical battery backup pump incase of a power outage! 

A homeowner in Framingham, MA started to notice an issue about her finished basement. She noticed water leaking through the foundation wall and floor from one particular side of the basement. That is because the yard outside slopes downwards towards that side of the basement, causing water to force itself through naturally. Standing water became visible after several rainstorms, so she contacted our company for help. We sent an inspector to look at the damage, and came up with a plan to install a TripleSafe sump pump system. To begin the process, the team jackhammers a whole at the lowest point of the basement where the water will naturally flow. Then they installed the TripleSafe into the hole for it to be covered in clean stone. Now, this homeowner has a system that will pump water out during heavy rainstorms and power outages due to the battery backup system! 

When this customer called he reported that all four walls of his basement were bowing. We sent out a certified professional to asses the situation and provide a written estimate for repairs.  We found that CarbonArmor was the best solution for this basement. CarbonArmor contains fiber-reinforced polymers which are 10X stronger than steel. Then ArmorLock brackets bind and secure the CarbonArmor to your floor joists.

When this customer called, he had bowing walls and was worried about the integrity of his foundation. We set out a specialist to inspect the property and provide a free written estimate. 

We found that applying CarbonArmor was the simplest, most cost-effective solution to help this customer. CarbonArmor contains fiber-reinforced polymers that are 10X stronger than steel. ArmorLock brackets then bind and secure the CarbonArmor to your floor joists. The best part about CarbonArmor is that it can be applied anytime through the year, even in the winter!