Bernardston, MA Pro Crawl Space Repair and Crawl Space Encapsulation Company

A homeowner from Bernardston, MA was walking through her living room floor until she noticed something very alarming. A portion of the floor was sagging downwards, and she could hear a slight creak if she applied pressure on it. Concerned, she decided to look for a professional to fix this sagging floor she discovered. Luckily, she came across our website and noticed our foundation support systems. She wanted a free estimate from one of our inspectors so that he could formulize a plan catered to her issue. 

Once the inspector arrived, he crawled into the crawlspace that was under her living room floor. Lo and behold, there was wood rotting on the support beam that was attached to the floor joists! The cold dirt was bringing in moisture into this crawl space which caused mold to grow onto it. Mold will ruin any organic material it can latch onto, in this case, the wood supporting the floor above was breaking off. 

The inspector knew that our SmartJack floor support system would not only permanently stabilize this floor, but will be useful for the future when the earth moves. Our SmartJack is able to adjust to any changes, meaning this was a no brainer for this homeowner!

The production team went on to install 2 SmartJacks under the weakened beam, and as they stabilized the floor, the homeowner noticed the drastic change! Her floor was not sagging down anymore and she was forever thankful she came to us for her sagging floor issue! 

This crawlspace in Bernardston, MA was no stranger to humidity. After a while, this crawlspace got increasingly damp from all the outside moisture getting into this area. The homeowner wanted a way to make sure of 2 things,  the air quality was good, and of course, not humid. It was no mistake to call us because we were able to provide the best way to prevent mold growth, our CleanSpace vapor barrier system! This system was rolled out onto the floor, covering every inch of the cold floor to provide a layer that separates the cold earth from this crawlspace. After, SilverGlo wall insulation was placed into the interior walls so that this crawlspace can maintain a constant temperature throughout the year!

There was a customer from Bernardston, MA that wanted to prevent moisture from getting through his basement walls. His walls were porous, meaning there were plenty of openings for moisture to get from the outside environment and into the basement. If moisture kept creeping in, the air wouldn't be safe to breathe due to mold growth along with a strange odor that nobody would want to smell! To resolve this, our inspector drew up a plan for a production crew to line up the walls with CleanSpace wall vapor barrier. This thick, polyethylene material was placed onto the walls by fasteners so it wouldn't fall. The basement looked brighter, safer and felt less humid than it was before once the crew was done with the installation! This customer had a peace of mind after protecting his basement from moisture! 

A customer in Bernardston, MA was enduring some high relative humidity within his unfinished basement. This was due to the excess water from the saturated ground making its way through the porous walls. This was not a good sign, since moisture can lead to mold growth, which is detrimental to ones home and family. Our inspector ventured to the basement to write up the best plan that fits the problem.  In conclusion, a service technician installed our SaniDry Sedona dehumidifier to bring down the relative humidity below 55%! This will make a huge difference for the basement, as the air will be better and safe to breathe in! 

This customer from Bernardston, MA noticed his SaniDry Sedona dehumidifier was louder than usual. He was aware that we do annual maintenance checks, but this issue seemed urgent. He called our appointment center to see if we could send a service technician to diagnose the problem and fix it. To the customer's delight, the technician was able to find that the fan was loose, along with a couple other screws that were used for the mounts. Once the technician tightened everything up, the noise was nonexistent! This customer was very smart to notice the problem and addressed it as soon as he could!